Cylindrical Trash Bags

basic instructions - Tiffany

Material:

• Glass
• Glass Nugget
• Submission 2x
• waterproof pen
• glass cutter
• Glass breaking pliers
• Glass Grinding
• Copper foil
• soldering iron
• soldering fluid
• Solder
• Patina
• Film
• Scissors
• Copper wire
• silver wire
• Brush •
old towel


Here's how:

The Tiffany template required 2x: one comes in a clear plastic folder, and the other copies on cardboard and cut out. On the original paint on an arrow that shows should run in what direction the grain of the glass. The cut-out templates on the right side of the glass insert and record the outlines. cut

With the glass cutter on the line drawn along and break the glass with the glass breaking pliers.

The glass grinder to grind the exact fit the template. dry rub

the glass with an old cloth around the edges and wrap the edges with copper foil.

The entire glass parts are put back on the template, and soldered together.


the Copper wire wound tightly and turn up apart to solder the copper wire to the wings. Cut off small pieces of silver wire and turn to the sensors. This solder on the head.


rinse the whole butterfly, then rubbed with a patina and flush the whole thing again.

The butterfly can be placed ... be


... or put in a copper rod and used as flower plugs:


Tip: Spray
The final Tiffany part after the full completion with Pronto furniture spray and a soft cloth blank rub .............. the protects the solder oxidize before.